Small screen test harness
The Activia ACDU screen is a small screen that is only used on the repower busses
BOM
Component | Description | Partnumber |
---|---|---|
Ethernet socket | Ethernet socket on rear of enclosure | RS# 175-0145 |
8 Pin connector | Rear panel interface for connecting to external equipment (plugs are either RS# 125-1080 or RS# 111-5759) | RS# 111-5765 |
Mains connector | C14 Snap-In IEC Connector Male, 10A, 250 V with Fuse | RS# 811-7204 |
Power Switch | Front panel power switch | RS# 793-2575 |
Toggle switches | Front Panel switches for changing between modes | RS# 734-7154 |
LED holder | Holder for LEDs | RS# 262-2999 |
PSU | Meanwell PSU RD-65A. Output 8 A at 5 VDC and 4A at 12 VDC at 4 A. | RS# 644-7102 |
Enclosure | 153 x 110 x 66 mm Plastic | RS# 454-943 |
Pinouts
26 way TE connectivity connector
- Pin 1, 2, 3 (VBAT).
- Pin 4, 8, 23 (GND).
- Pin 9, 10, 11, 12 (Ethernet RX+- and TX +- (OR, OR/WH, GN, GN/WH)).
- Pin 13 (FMODE – this is temporarily put to ground to put the unit in “force download mode”. It will then need to be disconnected after downloading the files). – Fit a toggle switch between Pin 13 and GND,
- Pin 14 OR 15 (Wakeup1 – pin 14 is activated by applying ground, Wakeup2 pin 15 to VBAT (floating)).
- Pin 5, 6 CAN1 (5 CAN1-H, 6 CAN1-L) - I-CAN
- Pin 16, 17 CAN2 (16 CAN2-H, 17 CAN2-L) - P-CAN
- Pin 7, UIN1
- Pin 18, IN12
- Pin 19, In13
- Pin 20, IN14
- Pin 24, INA1 (take to VBAT)
- Pin 25, INA2 (take to VBAT)
- Pin 26, INA3 (take to VBAT)
- Cavities 21, 22 do not populate
The cable plug is made up of 26 way TE connectivity connector, MF# 3-1437290-7, FN# 2060327 and crimps MF#3-1447221-3, FN#3399311.
Backlinks:
Plugin Backlinks: Nothing was found.